FEKA

FEKA

65-FEKA is low-pressure pump, designed for wide range of uses, applicable for pumping polluted sewage water with self-priming ability up to 6 meters.

Application

65-FEKA is low-pressure pump, designed for wide range of uses, applicable for pumping polluted sewage water with self-priming ability up to 6 meters. The application of this pump is pumping in fieldwork, building industry and agriculture; dewatering, transporting and watering. Maximal specific weight of pumping water is up to 1 065 kilograms per cubic meter with 3% weight amount of hard mechanical inclusions up to 3 millimetres granulation. Maximal temperature of pumping water is up to 40 °C and acidity 6 – 7,5 pH at 20 °C.

Construction

The pump construction is horizontal type. It consists of hydraulic and mechanic parts. Hydraulic part consist of body, which comprise simply volute, discharge space and flow canal. Flow canal circulates water in the body during pump starting. There is a suction body with non return flap on the front side. Non return flap is pressing by suction socket or suction elbow. In the spiral part of body there is overhung semi open impeller. The yoke for connect discharge transition is in the top part.
Drive for the monoblok pump type is electromotor, pump rotor is elongated shaft of motor. The pump and the electromotor are connected to one compact unit. In solo type, mechanical part is formed by cover body and shaft, which is fixed in one ball bearing. The shaft is caulking by packing in stuffing box and protected by renewable sleeves. The pump has left rotary drive.
Suction and discharge pipe for mobile construction have pressure-suction hoses. Suction hose is connected to pump with quick-action coupler B75 type and it is ended by tube filter. Discharge hose is connecting with clip and it is ended by DN 65 sleeve. The suction pipe length is 2, 3, 4 or 5 meters standard, discharge pipe length is 3 meters. Mobile type aggregates are equipped by A. C. circuit breaker and socket 3P+PE, 16A, 400V type.

Execution

LN - pump body, impeller, shim, suction and discharge socket, bearings body – cast iron, shaft – structural steel, impeller nut – brass

Selection of pump material version is according to pumping liquid.

Delivery range

pump with free shaft end
monoblok version
pump with drive on base plate
pump with drive on bogie
with alternative power according to individual requests of customer

Self-priming sludge

© Copyright 2011 by SLOVPUMP TRADE s.r.o.
Webdesign a výroba: tvorba web stránok web stránky a aplikácie